Description
Features & Benefits
- Able to pump soft organic solids, sanitary products, thin rubber products and even some textiles in suspension, by shredding to a slurry
- Open impeller prevents blockage of the pump by small solids in the slurry
- High heads and small solids allow connection to small discharge pipe systems, especially suited to pumping waste water to pressure sewer mains
- Silent operation
- Quick and easy installation
- Hose tail supplied with every pump
- Low maintenance
- Fully repairable
- Mounting feet with rubber cushions fitted for a firm and stable positioning during installation and operation for D75G/GA, DT08G, D120G/A, D150G/A, DT12G & DT15G.
- Adaptable to slide rails – see accessories
PUMP
- Heavy duty shredding and grinding ring at inlet
- Centrifugal design, open impeller
- Double Mechanical shaft seal in oil bath
- Hard faced Silicon Carbide/Ceramic seal on pump side
- Sand slinger lip seal for added protection
- Oring casing sealing
- Corrosive resistant stainless steel and quality heavy duty powder coated cast iron pump parts
MOTOR
- 2 pole, 2900rpm 50Hz 240V single phase or 415V three phase
- Submersible with IPx8 enclosure
- Class F insulation
- 10 metre HO7RN-F oil resistant power lead and seal sensor lead fitted with bared wire lead ends for easy connection to power supply terminations
- Seal sensor leads fitted for easy connection to a protection relay to enable timely repairs prior to motor Not fitted to D75G/GA or DT08G models
- Protected against both high operating temperatures and high current by a built in automatically resetting thermal overload
Reviews
There are no reviews yet.